Additives

HiTest is a concentrated, metal-free octane booster designed to increase power by increasing octane number and combustion efficiency. The advanced formulation eliminates knocking by increasing the auto-ignition temperature of the air/fuel mixture and readily mixes with all fuels, including nitro and alcohol mixtures. The...

Red Line Friction Modifier & Break-In Additive - 4 oz

Red Line 85+ Diesel Fuel Additive - 12oz.

Red Line Lead Substitute - 12oz.

Red Line SI-1 Fuel System Cleaner - 15oz.

Red Line Complete Fuel System Cleaner for Motorcycles - 4oz.

An effective mixture of additives that clean and maintain fuel systems of port injected and carbureted gasoline engines. Cleans injectors, combustion chamber and protects against corrosion. Restores proper fuel atomization and improves engine efficiency. Regular use keeps the fuel system in perfect working order.

Acombination of additives that clean and maintain diesel fuel systems. Prevents corrosion and increases lubrication thus reducing fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions. Regular use keeps the fuel system in perfect working order.

Add contents to the cooling water. Turn the heating to maximum and let the engine run on idle for 10 - 30 minutes depending on the degree of contamination. Drain the coolant and flush the cooling system with water. Fill the cooling system according...

LIQUI MOLY 500ml Marine Gasoline System Cleaner

LIQUI MOLY 1L Marine Gasoline Stabilizer

One 500 ml can is sufficient for up to 5 liters(1.3 gal.) of oil. Add Pro-Line Engine Flush to the engine oil at operating temperature before changing the oil. After adding the product allow the engine to idle for 10 to 15 minutes depending...

To be added directly into the fuel tank. As a preventive measure, add during each inspection, after repairs on the fuel system and after each Jet-Clean cleaning operation. The product mixes with the fuel automatically. Minimum fuel filling of 25 liters (7 gal.) is...

High-tech fuel additive, developed specifically for improved throttle response under partial engine load. Optimizes fuel atomization and combustion, cleans fuel system while providing maximum engine performance and efficiency.

MoS2 Anti-Friction Engine Treatment ensures immediate friction and wear reduction, adds an extremely protective and pressure-resistant boundary layer with low friction and lubricates during cold starts to prevent damage from lack of oil. Contributes to lower fuel consumption, longer engine life and less noise....

One 300 ml can is sufficient for up to 75 liters (20 gal.) of fuel. Regular use keeps injection system in perfect working order and gives lowest exhaust emissions. Smoother idling, better throttle response. Injection Cleaner can be mixed with fuel at any time...

A combination of additives to clean and maintain the diesel fuel system. Prevents corrosion, increases lubrication thus reduces fuel pump and injector wear. Increases Cetane value for improved engine performance, easier starting and lower emissions. Regular use keeps the fuel system in perfect working...

High-tech anti-wear additive, suitable for most 4-stroke engines as well as manual transmissions and compressors.Reduces friction and wear thanks to a unique combination of ceramic compounds and chemical anti-wear agents. It will prevent direct metal-to-metal contact and reduce friction to increase engine life and...

The aFe filter restore kit comes with a squeeze bottle of aFe gold filter oil and a spray bottle of aFe filter cleaner. aFe filter oil is highly refined and helps capture the smallest debris. Recommended re-oiling every 20-30k miles. Please do not over...

Highly refined filter oil captures the finest of dirt particles while still allowing flow through the aFe Pro GUARD 7 air filter. aFe recommends recharging your aFe air filter between 20-30000 miles.