rockjock

RockJocks Adjustable Sway Bar End Link Set features 8 1/2 in. long link rods and their high-end sealed rod ends. The rods feature 2 5/8 in. of 1/2 in.-20 LH thread and 2 5/8 in. of 1/2 in.-20 RH thread, providing adjustment as-is and...

RockJocks Sway Bar End Link Stud is 6 1/2 in. long and features 2 in. of 1/2 in.-20 LH thread and 2 in. of 1/2 in.-20 RH thread, providing adjustment as-is and extra thread, allowing you to cut it shorter as deemed necessary by...

RockJocks fabricated steel Antirock sway bar arms are 20 in. long overall, making them 18.195 in. from center of splined hole to center of farthest 1/2 in. hole. Arms feature the 5 adjustable link mounting holes for fine tuning of the sway bar in...

Overlanders and Racers! If you've been in need of a heavier front sway bar to support the added load, and resulting sway) of the addition of a rack, a roof top tent, camping gear, etc. – or – if you are a desert racer...

RockJocks Antirock sway bar arm hardware kit includes 2 clear anodized, tapered aluminum washers and flat head allen bolts for arm retention and a 3/8 in.-24 arm pinch bolts and nyloc nuts.

Replace Antirock Sway Bar arm stickers with a fresh pair, or bring your old Antirock up to date with the new style! This pair of stickers is for use on arms that are bent.

RockJock Antirock Sway Bar End Link Rod 3.5in

RockJocks Antirock sway bar kits are available in a universal fit configuration for those building their own custom rigs and rock buggies. This universal kit features a 39 1/2 in. torsion bar length and 17 in. long fabricated steel arms. Vertical links use a 14...

RockJocks Antirock sway bar kits are available in a universal fit configuration for those building their own custom rigs and rock buggies. This universal kit features a 45 in. torsion bar length and 17 in. long fabricated steel arms. Vertical links use a 14 in....

RockJocks Universal Sway Bar Link Mounting Tab is designed to weld to a differential housing tube and provides 3 adjustable mountings hole to bolt your sway bar's vertical link to. This tab is 1/4 in. thick, raw finish, weldable steel.

RockJocks greaseable bolts include the grade 8 zerk fitted bolt, 2 flat washers and a stover nut. We use these bolts to grease our Johnny Joint rod ends, but they can be used in numerous applications. This bolt is 9/16 in.-18 thread x 4...

RockJocks 1 1/4 in.-12 right hand thread jam nut for use on RockJock Johnny Joints with treaded shanks, or in any other application that would need a 1 1/4 in. jam nut. Gold zinc plated, sold each.

RockJocks premium quality, long lasting grease has be proven in all of our own competition and recreational vehicles over the last 15+ years. Non-moly and synthetic greases eventually dry up and cause squeaking, friction and component wear. We only use moly grease for maximum...

RockJocks rebuild kit for the 2 1/2 in. Johnny Joint rod ends includes 2 urethane bushing halves, 2 side washers and 1 snap ring. The CE-9110T Johnny Joint tool makes this rebuild job a lot easier!

RockJocks rebuild kit for the 2 in. Johnny Joint rod ends includes 2 urethane bushing halves, 2 side washers and 1 snap ring. The CE-9112T Johnny Joint tool makes this rebuild job a lot easier!

RockJocks rebuild kit for the 2 in. narrow style Johnny Joint rod ends includes 1 urethane bushing, 2 side washers and 1 snap ring. The CE-9112T Johnny Joint tool makes this rebuild job a lot easier!

RockJocks narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a...

RockJocks forged Johnny Joints for fabricators and suspension system builders offer 30 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density urethane...

RockJocks narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via a...

RockJocks narrow forged Johnny Joints for fabricators and suspension system builders offer 40 degrees of unrestricted movement in any direction as compared to 22 degrees on a common heim joint! Johnny Joint rod ends offer cushioning that a heim joint cannot provide via high-density...